Firmware Updating; Checking The Machine Firmware Version; Updating The Controller Firmware - Kyocera PE-MF2 Service Manual

Firmware Updating

• Do not turn off the main power of the machine during the firmware updating. If doing so, the engine
board or controller board may be damaged.

Checking the Machine Firmware Version

1. Turn the machine on.
2. Press "User/Tools" key and select "Report Print" with the "Up" or "Down" key.
3. Press "OK" and select "Maintenance Page" with the "Up" or "Down" key.
4. Press "OK" to display the "Firmware version (Controller)" and "Engine FW version"

Updating the Controller Firmware

Using the following procedure to update the controller firmware. Be sure to print the configuration page
both before and after the update. Comparing pre- and post-update configuration pages allows you to
check whether or not the update was successful.
Follow the procedure carefully, and note that it will vary in parts depending on which version of the firmware
is currently installed.
Preparation
1. Download the firmware file on you PC.
2. Unzip the firmware file.
• The firmware file contains the manual folder and other updating applications as show above.
Firmware Updating
5
101