Rmdir - Cisco Catalyst Blade Switch 3130 Reference Manual

Appendix A Cisco Catalyst Blade Switch 3130 for Dell Boot Loader Commands

rmdir

Use the rmdir boot loader command to remove one or more empty directories from the specified file
system.
Syntax Description
filesystem:
/directory-url
Command Modes
Boot loader
Command History Release
12.2(40)EX1
Usage Guidelines Directory names are case sensitive and limited to 45 characters between the slashes (/); the name cannot
contain control characters, spaces, deletes, slashes, quotes, semicolons, or colons.
Before removing a directory, you must first delete all the files in the directory.
The switch prompts you for confirmation before deleting each directory.
Examples
This example shows how to remove a directory:
switch: rmdir flash:Test
You can verify that the directory was deleted by entering the dir filesystem: boot loader command.
Related Commands Command
dir
mkdir
OL-13271-01
rmdir filesystem:/directory-url ...
Alias for a flash file system. Use flash: for the system board flash device.
Path (directory) and name of the empty directories to remove. Separate each
directory name with a space.
Modification
This command was introduced.
Description
Displays a list of files and directories on the specified file system.
Creates one or more new directories on the specified file system.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
rmdir
A-19