Leds; Gbic Ports - Extreme Networks Summit 300-24 Hardware Installation Manual

Summit7i Switch
Figure 44: Rear view of the Summit7i switch
Power socket Power socket
Label
EW_S7iRr
The rear panel of the Summit7i switch includes two AC power sockets and the system label.

LEDs

Each Summit7i model has the following LEDs:
• Unit status
• Management
• Port status
• Port speed
• Management port
For information about the LEDs and their activity on the Summit7i switch, see "Summit1i, Summit5i,
Summit7i, and Summit48i Switch LEDs" on page 97.

GBIC Ports

Both Summit7i switch models provide four unpopulated GBIC ports with SC connectors. You can use
the following GBICs in the Summit7i switch:
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LX70
• ZX GBIC
• LX100
• UTP GBIC
For more information about the supported GBIC types, see "GBIC Type and Hardware/Software
Support" on page 23. For specifications of individual GBIC models, see "GBIC Specifications" on
page 338.
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 95