Extreme Networks Summit 300-24 Hardware Installation Manual page 252

Installing and Connecting BlackDiamond 6800 Series Power Supplies
Figure 144: Removing BlackDiamond 6816 DC power supplies
10 Hold the edges of the power supply with both hands and slowly pull the power supply toward you.
After you pull the power supply toward you, place both hands underneath the power supply to
support it as you pull it out of the chassis.
CAUTION
The power supply weighs approximately 30 pounds (14 kg).
CAUTION
Do not handle the power supply using the DC output bus bars.
Install a replacement power supply following the instructions in "Installing a BlackDiamond 6800 Series
DC Power Supply" on page 248.
Leave the ESD strap permanently connected to the chassis so that it is always available when you need
to handle ESD-sensitive components.
252
BD_034
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide