Extreme Networks Summit 300-24 Hardware Installation Manual page 283

Configuring I/O Modules
Both ports are reserved for use only by Extreme Networks technical support personnel for diagnostic
procedures.
Software Requirements
The PoS modules require ExtremeWare 7.0 or later on both the MSM module and the PoS module,
BootROM 7.8 for the MSM module, and BootROM 1.18 for the PoS module.
For more information about the software requirements, PoS module features, and PoS module
configurations, see the ExtremeWare Software User Guide and the ExtremeWare Command Reference Guide.
Hardware Requirements
The PoS modules are compatible only with "i"series MSMs. For the most current list of I/O modules
supported for use with the PoS modules, consult your release notes.
PoS modules installed in a BlackDiamond chassis require at least one BlackDiamond Ethernet I/O
module also installed in the chassis in order to operate correctly.
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 283