Extreme Networks Summit 300-24 Hardware Installation Manual page 130

Installing and Connecting Summit Power Supplies
Figure 69: Attaching the retaining bracket using spacers
Figure 70: Attaching the retaining bracket to the power socket
6 Attach the retaining bracket to the power supply in one of the following ways:
• If you removed retaining screws from the power socket, use those screws to attach the
• For power supplies with permanently attached standoffs, attach the retaining bracket to the
power supply using the bracket screws, as shown in Figure 68.
• For power supplies without permanently attached standoffs, use the supplied spacers between
the bracket and the power supply, as shown in Figure 69.
130
Spacers
Bracket screws
Retaining bracket screw
LB48024
SH_001
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide