Table of Contents
Advertisement
Monitoring the Device
•
Monitoring Overview........................................................................................................................................................................................ 77
•
LED Types............................................................................................................................................................................................................77
•
LED ports behavior...........................................................................................................................................................................................79
Monitoring Overview
The Extreme device is engineered for reliability and requires no routine operational steps or maintenance. You can monitor the device by
paying attention to the following information:
•
The LEDs showing the status of system components
•
A description of the operations that the device performs when you power it on
The following commands can be especially helpful in monitoring the health status of various device components. For details about these
commands, refer to the Extreme SLX-OS Monitoring Configuration Guide for the SLX 9030-48S/SLX 9030-48T platform.
•
show chassis
•
show system
•
show slots
•
show linecard
•
show environment fan
•
show environment power
•
show environment sensor
•
show environment temp
LED Types
On the SLX 9030 platforms, there are four types of LEDs visible on the front of the device faceplate. They are the following:
1.
System power LED
2.
System status LED
3.
Ethernet Status LED
4.
Port LEDs
System LEDs
There are two RJ-45 connectors on the front panel, one is 10/100/1000 Ethernet port, another is the RS232 console port.
ExtremeSwitching SLX 9030 Hardware Installation Guide
9035691-02 Rev AD
77
Advertisement
Table of Contents
