Installing and Connecting BlackDiamond 6800 Series Power Supplies
When you install any power supply in a BlackDiamond 6800 series switch, orient the power supply as
follows:
• For the BlackDiamond 6816 switch, as shown in Figure 134:
— Retaining screws to the left
— Locking handle at the bottom
• For the BlackDiamond 6808 or Black Diamond 6804 switch, as shown in Figure 135:
— Power supply right side up, with the retaining screws at the bottom
— Locking handle to the right
Figure 134: Orientation of the DC power supply in a BlackDiamond 6816
242
BD_034
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide