Extreme Networks Summit 300-24 Hardware Installation Manual page 190

Summit 200 e, 300 e, 400 e, i series
Hide thumbs Also See for Summit 300-24:
Table of Contents

Advertisement

Alpine 3800 Series I/O Modules
3
The GM-16T
module supports distances of up to 100 meters over CAT 5 cabling.
Each of the 16 ports in the GM-16T
maximum module throughput of 4 Gigabits to the Alpine backplane. When a GM-16T
an Alpine 3808, and five or more ports of ports 1 through 8 or ports 9 through 16 are simultaneously
forwarding unusually high rates of small, uniformly sized packets (for example, 64 Byte), the
bandwidth through each port can be lower than the expected minimum of 250 Mbps.
When you install and configure a GM-16T
port-based load-sharing (link-aggregation) algorithm when the share has more than four ports because
traffic coming from the GM-16T
the share. Load-sharing using other load balancing algorithms can have up to eight links.
LEDs
3
The GM-16T
module has the following LEDs:
• Module status
• Port status
For information about the LEDs and their activity on the GM-16T
page 202.
Software Requirements
3
The GM-16T
module requires ExtremeWare version 7.0.1b11 or later and BootROM 7.8 or later on the
switch.
190
3
is capable of supporting up to a full gigabit of traffic with a
3
module, Extreme Networks does not recommend using the
3
or GM-16X
3
modules will only load-share over the first four ports of
module, see "I/O Module LEDs" on
3
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
3
is operational in

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents