Configuring I/O Modules
LEDs
3
The 10GX
module has the following LEDs:
• Module status (Status)
• Port status (Link Activity)
• Diagnostics
For information about the LEDs and their activity on the 10GX
3
module, see "I/O Module LEDs" on
page 293.
Software Requirements
The BlackDiamond MSM requires both BootROM 8.1 (or later) and the final release build of
3
ExtremeWare 7.2 (or later) in order to recognize the 10GX
I/O module.
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
265