Extreme Networks Summit 300-24 Hardware Installation Manual page 153

• # 1 Phillips screwdriver
• A minimum of two people to help install the chassis in the rack
To mount the chassis in a rack:
1 Attach the helper bracket in the lowest available position in the rack using four appropriate screws
(not provided), as shown in Figure 83.
Figure 83: Helper bracket for installing the Alpine 3800 series chassis
2 Place the box containing the chassis upright on a secure flat surface with the front of the box facing
you.
3 Remove the chassis from the box, and remove the packing material from the chassis.
4 Have a minimum of two people lift and place the empty chassis on the helper bracket and slowly
guide the chassis into the rack.
5 While holding the empty chassis, secure it with four or eight suitable screws, depending on the
model.
• Alpine 3808—eight screws (Figure 84)
• Alpine 3804—eight screws (Figure 85)
• Alpine 3802—four screws (Figure 86)
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Installing the Chassis in a Rack
BDbrackt
153