Removing A Blackdiamond 6800 Series Fan Tray - Extreme Networks Summit 300-24 Hardware Installation Manual

17
Replacing the BlackDiamond 6800
Series Switch Fan Tray
This chapter provides instructions to install the following BlackDiamond fan trays:
• BlackDiamond 6816 fan trays (no. 53013)
• BlackDiamond 6808 fan tray (no. 50013)
• BlackDiamond 6804 fan tray (no. 50053)
The chapter includes the following topics:
• Removing a BlackDiamond 6800 Series Fan Tray on page 299
• Installing a BlackDiamond 6800 Series Fan Tray on page 301
NOTE
Read the information in this chapter thoroughly before you attempt to install or remove any
BlackDiamond fan tray.

Removing a BlackDiamond 6800 Series Fan Tray

BlackDiamond 6800 series fan trays are hot-swappable. You do not need to turn off power to a
BlackDiamond 6800 series switch to remove a fan tray.
You need the following tools and equipment to remove a fan tray:
• ESD-preventive wrist strap
• # 1 Phillips screwdriver
CAUTION
Only trained service personnel should perform service to BlackDiamond equipment. Before installing or
removing any components, or carrying out any maintenance procedures, see Appendix A.
NOTE
In the BlackDiamond 6816 or 6804, the fan trays are accessed from the front of the chassis.
In the BlackDiamond 6808, the fan tray is accessed from the back of the chassis.
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 299