Extreme Networks Summit 300-24 Hardware Installation Manual page 182

Alpine 3800 Series I/O Modules
You can configure parameters of the I/O module after it is installed or you can pre-configure a slot for a
certain type of module and configuration. The pre-configured information is applied to the module after
it is inserted. If you pre-configure a slot for a specific module type, and then insert a different type of
module, the module reverts to its default configuration.
NOTE
See the ExtremeWare Software User Guide and the ExtremeWare Command Reference Guide for more
information about configuring I/O modules.
182 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide