Alpine 3804 Switch - Extreme Networks Summit 300-24 Hardware Installation Manual

Alpine 3800 Series Switch Models
Figure 76: Rear view of the Alpine 3808 switch
The rear panel of the Alpine 3808 switch provides:
• Access to the grounding studs
• System label, which includes:
— Chassis serial number
— Ethernet MAC address of the switch
— Symbols of safety certification

Alpine 3804 Switch

The Alpine 3804 switch consists of the following components:
• One 5-slot chassis, 6 U high, with backplane
• Four I/O module slots, labeled slots 1 through 4
• One SMMi slot
• One or two power supplies, accessed from the rear of the unit
• One hot-swappable fan tray containing three fan units, accessible from the front of the switch
• One electrostatic discharge (ESD) wrist strap connector
144
Label
Grounding
studs
38_rear8
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide