Installing GBICs and Mini-GBICs
NOTE
Disconnect the fiber-optic cable from a mini-GBIC before removing the mini-GBIC from the switch.
To remove a mini-GBIC similar to the one labeled "Module A" in Figure 180, press and hold the black
plastic tab at the bottom of the connector to release the mini-GBIC, and pull the mini-GBIC out of the
SFP receptacle.
To remove a mini-GBIC similar to the one labeled "Module B" in Figure 180, rotate the front handle and
pull the mini-GBIC out of the SFP receptacle.
368
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide