Control Period - Omron E5EK DEVICENET User Manual

Setting Example
1 second min.
1 second min.
1 second min.
In this example, let's set the parameters as follows:
"control output 1 assignment" = "control output (heat)"
"control output 2 assignment" = "alarm output 1"
"direct/reverse operation"

"control period"

All of the above settings in this example are factory settings. So, in this
example, we are only going to check the parameter settings.
(1) Select the menu display, and select [
or keys. For details on selecting the menu display, see page
1-7.
(2) Press the key for one second minimum to enter the setup
mode. The top parameter in the setup mode [
displayed. In this example, the parameter setting is "17: 4 to 20
mA."
(3) Press the key until [
parameter) is displayed. The parameter default is [
(4) As the setting in this example is to be left as it is, press the
The display changes to [
parameter). The parameter default is [
(5) As the setting in this example is to be left as it is, press the
until [ ] ("direct/reverse operation" parameter) is displayed.
The parameter default is [
(6) As the setting in this example is to be left as it is, press the
keys to select [
(7) Press the key for one second minimum to enter the level 1
mode. The top parameter in the level 1 mode [
cancel" is displayed.
(8) Press the key until [
played. The parameter default is "20". As the setting in this exam-
ple is to be left as it is, quit key operation.
3.3 Setting Output Specifications
= "reverse operation"
= "20 sec."
] (setup mode) using the
] ("control output 1 assignment"
] ("control output 2 assignment"
].
].
] (level 1 mode).
] ("control period" parameter) is dis-
] "input type" is
].
key.
key
or
] "AT execute/
3--9