Omron E5EK DEVICENET User Manual page 143

SETTING AND MONITORING PARAMETER LIST
Mode Parameter Name
Security
Protect Protect
[A/M] key protect
Manual Manual MV
PV
Set point
Remote SP monitor
Set point during SP ramp
Level 0
MV monitor (heat)
MV monitor (cool)
Run/Stop
AT Execute/Cancel
Alarm value 1
Alarm value 2
Alarm value 3
Proportional band
Integral time
Derivative time
Cooling coefficient
Level 1
Dead band
Manual reset value
Hysteresis (heat)
Hysteresis (cool)
Control period (heat)
Control period (cool)
Heater current monitor
Heater burnout
Remote/Local
SP mode
SP ramp time unit
SP ramp set value
LBA detection time
MV at stop
MV at PV error
MV upper limit
Level 2 Level 2
MV lower limit
MV change rate limit
Input digital filter
Alarm 1 hysteresis
Alarm 2 hysteresis
Alarm 3 hysteresis
Input shift upper limit
Input shift lower limit
*1 During heat and cooling control, the lower limit becomes -105.0%.
*2 During heat and cooling control, the setting range becomes 0.0 to 105.0%.
*3 During heat and cooling control, the setting range becomes -105.0 to 0.0%.
SETTING AND MONITORING PARAMETER LIST
Some parameters are not displayed depending on the protect mode set-
ting and conditions of use.
Setting Range
0 to 6
ON/OFF
-5.0 to 105.0
SP setting lower limit to SP setting upper limit
RUN/STOP
OFF/AT-1/AT-2
-1999 to 9999
-1999 to 9999
-1999 to 9999
0.1 to 999.9
0 to 3999
0 to 3999
0.01 to 99.99
-19.99 to 99.99
0.0 to 100.0
0.01 to 99.99
0.01 to 99.99
1 to 99
1 to 99
0.0 to 50.0
RMT/LCL
RSP/LSP
M (Minutes)/H (Hours)
0 to 9999
0 to 9999
-5.0 to 105.0
-5.0 to 105.0
MV lower limit + 0.1 to 105.0
-5.0 to MV upper limit -0.1
0.0 to 100.0
0 to 9999
0.01 to 99.99
0.01 to 99.99
0.01 to 99.99
-199.9 to 999.9
-199.9 to 999.9
Unit Default
None 1
None OFF
% 0.0
*1
EU
EU 0
EU
EU
%
%
None RUN
None OFF During running
EU 0
EU 0
EU 0
%FS 10.0
sec 233
sec 40
At heating and
None 1.00
cooling control
At heating and
%FS 0.00
cooling control
% 50.0
%FS 0.10
At heating and
%FS 0.10
cooling control
sec 20
At heating and
sec 20
cooling control
A
Heater burnout
A 0.0
detection
None LCL
None LSP
None M
EU 0
sec 0
*1 % 0.0
*1 % 0.0
*2
% 105.0
*3 % -5.0
%/sec 0.0
sec 0
%FS 0.02
%FS 0.02
%FS 0.02
0.0 Temperature input
_C/_F
0.0 Temperature input
_C/_F
Remarks Setting
A--7