Omron E5EK DEVICENET User Manual page 16

CHAPTER 1 INTRODUCTION
F Protect mode
F Manual mode
J Selecting
parameters
J Fixing settings
1--8
• To set the controller to the protect mode or to return to the level 0
mode from the protect mode, press the
cond minimum simultaneously.
• To set the controller to the manual mode, press the
cond minimum in the level 0 to 2 mode. To return to the level 0 mode
from the manual mode, press the
• When not in the manual mode, each press of the
parameter.
• If you press the key when at the final parameter, the display re-
turns to the first parameter.
Parameter
Parameter
1
• If you press the key when at the final parameter, the display
returns to the first parameter.
• When you have changed a parameter setting, specify the parameter
using the or
seconds or press the
• When another mode is selected, the content of the parameters before
the mode was selected is fixed.
• When turning the power OFF, you must first fix the settings and
parameter contents (by pressing the
mode). The settings and parameter contents are sometimes not
changed by merely pressing the
key and
A/M
key for 1 second minimum.
A/M
Parameter
2 3
keys, and either leave the setting for at least two
key. This fixes the setting.
key or selecting another
or keys.
key for 1 se-
key for 1 se-
A/M
key switches the
Parameter
n