Omron E5EK DEVICENET User Manual page 15

Digital controller compobus/d (devicenet) type
Table of Contents

Advertisement

F Option mode
F Calibration mode
J Selecting modes
F Menu display
F Level 0 to 2
modes
F Setup mode
F Expansion mode
F Option mode
F Calibration mode
This is the mode for setting option functions. CompoBus/D (DeviceNet)
communications conditions, heater burnout alarm function, and remote
SP scaling parameters are also located in this mode.
This mode is provided so that the user can calibrate inputs.
When calibrating input, the selected input type is calibrated.
The following diagram shows the order in which modes are selected.
1 second min.
1 second min.
1 second min.
1 second min.
1 second min.
Expansion mode
1 second min.
1 second min.
Calibration mode
• To select the menu display in any of the above modes (excluding the
protect mode and the manual mode), press the
minimum. The previously specified mode is selected. For example, if
you selected the menu display while in the level 0 mode, the No.2 dis-
play change to [
• If you select the destination mode using the
press the
key for 1 second minimum when you have selected the
menu display, the top parameter in the specified mode is selected.
• Protected modes cannot be selected. Also, the menu display does not
appear when modes are protected up to the level 1 mode.
• If you select [
] [
0, level 1 and level 2 modes, respectively, are selected.
• These modes are selected with control still continuing.
• If you select [
] [
setup, expansion, option and calibration modes, respectively, are
selected. When these modes are selected, the control is reset. So, con-
trol outputs and auxiliary output are turned OFF. When another
mode is selected while in these modes, reset is canceled.
1.3 Parameters and Menus
Power ON
A/M
1 second min.
Level 0 mode
Level 1 mode
Level 2 mode
A/M
Setup mode
Option mode
] as shown on the left.
] or [
] in the menu display, the level
] [
] or [
Manual mode
A/M
1 second min.
+
+
A/M
1 second min.
1 second min.
Protect mode
+
A/M
1 second min.
key for 1 second
or
keys and
] in the menu display, the
1--7

Advertisement

Table of Contents
loading

This manual is also suitable for:

E5ek-drtE5ek

Table of Contents