Omron E5EK DEVICENET User Manual page 67

MV monitor (heat)
MV monitor (cool)
• This parameter cannot be set.
• Monitors the manipulated variable on the heating or cooling side.
• The manipulated variable in a standard control system is checked in the "MV
Function
monitor (heat)" parameter.
• The "MV monitor (cool)" parameter can be used only during heating and cooling
control.
• MV monitor (heat)
Standard
Monitor
Heating and cooling
• MV monitor (cool)
Heating and cooling
Run/Stop
• This parameter is used for checking the operating status of the controller, and for
specifying start and stop of operation.
Function
• To start operation, set this parameter to [
stop operation, set this parameter to [
"STOP" LED lights.
Example
of use
• Default is [
F Related article
3.6 Starting and Stopping Operation (page 3-14)
See
Control
Monitor Range
-5.0 to 105.0
0.0 to 105.0
Control
Monitor Range
0.0 to 105.0
]
Level 0 Mode
Conditions of Use
Control must be standard control or
heating and cooling control.
Unit
%
%
Unit
%
] press the
]. When operation is stopped, the
or keys. To
5--9