Omron E5EK DEVICENET User Manual page 31

F Setup
The following are examples of how to set up each of the items. These
examples assume that the controller is operated at the factory defaults.
The main specifications of the setup examples in this chapter are as fol-
lows:
• A K thermocouple is connected to the controller.
• The control output (heat) function is assigned to control output 1,
and the alarm 2 function is assigned to auxiliary output 1. A relay
output unit is also attached to control output 1.
• The upper limit alarm is set. In this example, alarm 2 is set. An alarm
is output when the temperature exceeds 10_C of the set point.
The control example that is configured based upon the setup example is
as follows:
Alarm 2 (upper limit)
(alarm value=10_C)
E5EK-AA2-DRT
(Control output 1: E53-R)
3.1 Convention Used in this Chapter
Control target
10 20
21 22
SOURCE
9 19
OUT1
18
8
17
7
6 16
15
5
SUB1 14
4
13
3
12
2
23
1 11
Temperature sensor:
K thermocouple
--
+
3--3