Omron E5EK DEVICENET User Manual page 72

CHAPTER 5 PARAMETERS
Level 1 Mode
Hysteresis (heat)
Hysteresis (cool)
• Sets the hysteresis for ensuring stable operation at ON/OFF switching.
• In standard control, use the "hysteresis (heat)" parameter. The "hysteresis (cool)"
parameter cannot be used.
Function
• In heating and cooling control, the hysteresis can be set independently for heating
and cooling. Use the "hysteresis (heat)" parameter to set the heating side hystere-
sis, and use the "hysteresis (cool)" parameter to set the cooling side hysteresis.
Comment
F Related article
4.1 Selecting the Control Method
F Related parameters
See
"Control output 1 assignment" "Control output 2 assignment" (setup mode)
"PID / ON/OFF" (expansion mode)
5--14
Parameter Setting Range
Hysteresis (heat) 0.01 to 99.99
Hysteresis (cool) 0.01 to 99.99
Conditions of Use
The control system must be ON/OFF
control.
Unit Default
%FS 0.10
%FS 0.10
@
ON/OFF control (page 4-3)