Omron E5EK DEVICENET User Manual page 63

• In this mode, manual operations are possible, and the "MANU" LED lights.
• When this mode is selected, the manipulated variable that was active immediately
before the mode was switched to is output. When changing the manipulated vari-
able, change it using the
If this mode is switched to during auto-tuning, auto-tuning is canceled.
• To select this mode when in the level 0 to 2 modes, press the
minimum. To exit this mode, press the
changes to the level 0 mode.
• "Manual MV" is the only parameter available in this mode.
Manual MV
• Sets the manipulated variable for manual operation. When you press the
keys, the manipulated variable is changed.
• The process value is displayed on the No.1 display and the manipulated variable is
Function
displayed on the No.2 display.
• The manual MV is held when the power is interrupted.
Control Method
Standard
Heating and cooling
Comment
F Related article
3.7 Adjusting Control Operation (page 3-15)
See
or keys.
key for 1 second minimum. The mode
A/M
Process value
Manipulated
variable
[MANU] LED
Setting Range
-5.0 to 105.0
-105.0 to 105.0
Manual Mode
A/M key for 1 second
Unit Default
% 0.0
% 0.0
or
5--5