Omron E5EK DEVICENET User Manual page 74

CHAPTER 5 PARAMETERS
Level 1 Mode
Heater burnout
• Outputs the heater burnout alarm when the heater current value falls below this
parameter setting.
• When the set value is "0.0", the heater burnout alarm is "OFF". When the set
Function
value is "50.0", the heater burnout alarm is "ON".
Comment
F Related article
4.4 How to Use the Heater Burnout Alarm (page 4-9)
F Related parameters
See
"Heater current monitor" (level 1 mode) "HBA latch" (option mode)
5--16
Setting Range Unit
0.0 to 50.0 A
Conditions of Use
The HBA output function must be
assigned.
Default
0.0