Omron E5EK DEVICENET User Manual page 100

CHAPTER 5 PARAMETERS
Calibration Mode
• The parameters in this mode can be used only when the "security" parameter
(protect mode) is set to "0". When selecting this mode for the first time after the
E5EK-DRT has left the factory, return the "security" parameter to "0".
• This mode contains the parameters for user calibration of inputs. Only parame-
ters relating to input types specified in the "input type" parameter (setup mode)
can be used.
• To select this mode when in the levels 0 to 2, setup, expansion and option modes,
press the
play. If you select [
cond minimum, the controller enters the calibration mode.
• For details on parameters in the calibration mode, see Chapter 7 Calibration.
5--42
key for 1 second minimum. The display changes to the menu dis-
] using the key then press the key for 1 se-