Omron E5EK DEVICENET User Manual page 91

α
• Usually use the default value.
• Sets 2-PID control parameter α.
Function
Setting Range
0.00 to 1.00
Comment
F Related parameter
"PID / ON/OFF" (expansion mode)
See
AT calculated gain
• Usually use the default value.
• Sets the gain when adjusting the PID parameters by auto-tuning.
• To give priority to response, decrease the set value of this parameter. To give
Function
priority to stability, increase the set value of this parameter.
Setting Range
Comment
F Related parameters
"AT Execute/Cancel" (level 1 mode)
"PID / ON/OFF" (expansion mode)
See
Unit
None
Unit
0.1 to 10.0 None
Expansion Mode
Conditions of Use
The control must be 2-PID control.
Default
0.65
Conditions of Use
The control must be 2-PID control.
Default
1.0
5--33