Omron E5EK DEVICENET User Manual page 76

CHAPTER 5 PARAMETERS
Level 2 Mode
Remote/Local
• Switches between remote and local operation.
• To change the parameter setting during remote operation, use the communica-
tions function. To change the parameter setting during local operation, change the
Function
setting on the E5EK-DRT controller.
You can check the parameter setting by both communications and on the E5EK-
DRT controller regardless of whether the controller is switched to remote or local
operation.
[
Comment
F Related article
Chapter 6 Using the CompoBus/D (DeviceNet)
F Related parameters
See
"Communication speed" "Node address" (Option mode)
SP mode
• Switches between remote SP and local SP .
Function
[
Comment
F Related article
4.3 How to Use the Remote SP (page 4-7)
F Related parameters
See
"Remote SP enable"
5--18
Setting Range
]: remote / [ ]: local
Setting Range
]: Remote SP/[ ]: Local SP
Default
[ ]
Conditions of Use
The remote SP function must be
enabled.
Default