Connecting To A Serial Port - Omron CP1L CPU UNIT - 06-2007 Operation Manual

Connecting the CX-Programmer
Reinstalling the USB Driver
1,2,3...
1-3-2

Connecting to a Serial Port

Connection Method
Computer
Model Connector
IBM PC/AT or D-Sub 9 pin,
compatible male
1. Right-click USB Device and select Delete from the pop-up menu to delete
the driver.
2. Reconnect the USB cable. The USB Driver Installation Window will be dis-
played.
3. Reinstall the USB driver.
Mounting a CP1W-CIF01 RS-232C Option Board in a CP1L Option Board slot
makes it possible to connect Support Software with serial communications,
just as with previous models.
Recommended cable
XW2Z-200S-CV (2 m) or
XW2Z-500S-CV (5 m)
CP1W-CIF01
RS-232C Option Board
Connect the CX-Programmer to the RS-232C port of the CP1W-CIF01 Option
Board by XW2Z-200S-CV/500S-CV RS-232C cable.
Connect the Programming Device using the Connecting Cable that is appro-
priate for the serial communications mode of the computer and CPU Unit.
Connecting Cable
Model Length
XW2Z-200S-CV 2 m
XW2Z-500S-CV 5 m
Personal computer
CX-One (e.g., CX-Programmer)
D-Sub connector
(9-pin, female)
D-Sub connector
(9-pin, male)
CP1L CPU Unit
Connector
D-Sub 9 pin, female
(With a CP1W-CIF01 RS-
232C Option Board
mounted in Option Board
Slot 1 or 2.)
Section 1-3
Serial
communications
mode
Peripheral bus or Host
Link (SYSWAY)
27