Mounting; Mounting In A Panel - Omron CP1L CPU UNIT - 06-2007 Operation Manual

Mounting

3-3 Mounting
3-3-1

Mounting in a Panel

Surface Installation
CP1L CPU Unit
• Do not install the CP1L in any of the following orientations.
When mounting the CP1L CPU Unit in a panel, use either surface installation
or DIN Track installation.
Even if a DIN Track is not used, a CP1L CPU Unit and CP/CPM1A-series
Expansion Units or Expansion I/O Units can be mounted using M4 screws.
For restrictions on the number of Expansion Units and Expansion I/O Units
that can be connected, refer to 1-2 System Configuration.
Expansion I/O Units or Expansion Units
Section 3-3
93