Omron CP1L CPU UNIT - 06-2007 Operation Manual page 54

Connecting the CX-Programmer
Installing the USB Driver
1,2,3...
The procedure for first connecting a computer to the CP1L peripheral USB
port is described below.
It is assumed that the Support Software has already been installed in the
computer.
Windows XP
Turn ON the power supply to the CP1L, and connect USB cable between the
USB port of the computer and the peripheral USB port of the CP1L.
After the cable has been connected, the computer will automatically recognize
the device and the following message will be displayed.
1. If the following window appears, select the No, not this time Option and
then click the Next Button. This window is not always displayed.
2. The following window will be displayed. Select the Install from a list of spe-
cific location Option and then click the Next Button.
Section 1-3
21