Omron CP1L CPU UNIT - 06-2007 Operation Manual page 412

Memory Cassette Functions
Note
All valid data in the Memory Card will be automatically transferred to the CPU
Unit.
When this function is executed, at least the user program must be stored on
the Memory Cassette.
CP1L CPU Unit
Data in CPU
Unit
DIP switch SW2 set to ON.
Data automatically transferred from Memory
Cassette to CPU Unit.
Programs, parameters, DM initial values,
comment memory, etc. (Can be specified
individually.)
This function can be used to copy data to another CPU Unit without using the
CX-Programmer.
CP1L CPU Unit
Data in CPU
Unit
Programs, parameters, DM initial
values, comment memory, etc.
User programs can be overwritten to upgrade equipment versions without
using the CX-Programmer.
If writing data from the CPU Unit to the Memory Cassette and the CPU Unit is
set to use the operating mode specified in the PLC Setup as the operating
mode after automatic transfer at startup, operation can be started without
cycling the power, enabling operation from the Memory Cassette.
Power turned ON.
CP1W-ME05M
Memory Cassette
Section 6-6
Another CPU Unit
Can be automatically
transferred at startup.
379