Specifications; Cp1L Cpu Units - Omron CP1L CPU UNIT - 06-2007 Operation Manual

Specifications

DIP Switch for Operation Settings
Note
2-2 Specifications
2-2-1

CP1L CPU Units

General Specifications
Power supply classification
Model 40 I/O points
numbers
30 I/O points
20 I/O points
14 I/O points
Power supply
Operating voltage range
Power consumption
Inrush current
(See note 1.)
Pin
1 ON ON (both ends)
OFF OFF
2 ON 2-wire
OFF 4-wire
3 ON 2-wire
OFF 4-wire
4 --- ---
5 ON RS control enabled
OFF RS control disabled (Data
always received.)
6 ON RS control enabled
OFF RS control disabled (Data
always sent.)
(1) Set both pins 2 and 3 to either ON (2-wire) or OFF (4-wire).
(2) To disable the echo-back function, set pin 5 to ON (RS control enabled).
(3) When connecting to a device on the N side in a 1: N connection with the
4-wire method, set pin 6 to ON (RS control enabled).
Also, when connecting by the 2-wire method, set pin 6 to ON (RS control
enabled).
AC power supply
CP1L-M40DR-A
CP1L-M30DR-A
CP1L-L20DR-A
CP1L-L14DR-A
100 to 240 VAC
50/60 Hz
85 to 264 VAC
50 VA max. (CP1L-M@DR-A)
30 VA max. (CP1L-L@DR-A)
100 to 120 VAC inputs:
20 A max.(for cold start at room tem-
perature.)
8 ms max.
200 to 240 VAC inputs:
40 A max.(for cold start at room tem-
perature.)
8 ms max.
Section 2-2
Settings
Terminating resistance selection
2-wire or 4-wire selection (See
note 1.)
2-wire or 4-wire selection (See
note 1.)
Not used.
RS control selection for RD (See
note 2.)
RS control selection for SD (See
note 3.)
DC power supply
CP1L-M40DR-D, CP1L-M40DT-D, or
CP1L-M40DT1-D
CP1L-M30DR-D, CP1L-M30DT-D, or
CP1L-M30DT1-D
CP1L-L20DR-D, CP1L-L20DT-D, or
CP1L-L20DT1-D
CP1L-L14DR-D, CP1L-L14DT-D, or
CP1L-L14DT1-D
24 VDC
20.4 to 26.4 VDC
See note 3.
20 W max. (CP1L-M@DT@-D)
13 W max. (CP1L-L@DT@-D)
30 A max.(for cold start.)
20 ms max.
39