Omron CP1L CPU UNIT - 06-2007 Operation Manual page 17

Cat. No. Model numbers
W344 WS02-PSTC1-E
W342 CS1G/H-CPU@@H
CS1G/H-CPU@@-V1
CS1D-CPU@@H
CS1D-CPU@@S
CS1W-SCU@@-V1
CS1W-SCB@@-V1
CJ1G/H-CPU@@H
CJ1G-CPU@@P
CJ1M-CPU@@
CJ1G-CPU@@
CJ1W-SCU@@-V1
xviii
Manual name
CX-Protocol Opera- Provides operating procedures for creating protocol
tion Manual macros (i.e., communications sequences) with the
CX-Protocol and other information on protocol mac-
ros.
The CX-Protocol is required to create protocol mac-
ros for user-specific serial communications or to
customize the standard system protocols.
SYSMAC CS/CJ/CP/ Describes commands addressed to CS-series, CJ-
NSJ-series Communi- series, and CP-series CPU Units, including C-mode
cations Commands commands and FINS commands.
Reference Manual
Note This manual describes on commands
Description
address to CPU Units regardless of the com-
munications path. (CPU Unit serial ports,
Serial Communications Unit/Board ports, and
Communications Unit ports can be used.)
Refer to the relevant operation manuals for
information on commands addresses to Spe-
cial I/O Units and CPU Bus Units.