Omron CP1L CPU UNIT - 06-2007 Operation Manual page 597

Auxiliary Area Allocations by Address
Addresses Name
Word Bits
A526 A526.00 Serial Port 2
Restart Bit
(CP1L M-
type CPU
Units)
Serial Port 1
Restart Bit
(CP1L L-
type CPU
Units)
A526.01 Serial Port 1
Restart Bit
(CP1L M-
type CPU
Units)
A527 A527.00 Online Edit-
to ing Disable
A527.07 Bit Validator
A527.09 Online Edit-
ing Disable
Bit
564
Function
Turn this bit ON to restart the serial
port 2 of a CP1L M-type CPU Unit.
(Do not use this bit when the port is
operating in Peripheral Bus Mode.)
Note This bit is turned OFF auto-
matically when the restart
processing is completed.
Turn this bit ON to restart the serial
port 1 of a CP1L L-type CPU Unit.
(Do not use this bit when the port is
operating in Peripheral Bus Mode.)
Note This bit is turned OFF auto-
matically when the restart
processing is completed.
Turn this bit ON to restart the serial
port 1 of a CP1L M-type CPU Unit.
Note This bit is turned OFF auto-
matically when the restart
processing is completed.
The Online Editing Disable Bit
(A527.09) is valid only when this byte
contains 5A.
To disable online editing from the
CX-Programmer, set this byte to 5A
and turn ON A527.09.
(Online editing refers to changing or
adding to the program while the PLC
is operating in MONITOR mode.)
Turn this bit ON to disable online
editing. The setting of this bit is valid
only when A527.00 to A527.07 have
been set to 5A.
Settings Status Status at
after startup
mode
change
OFF to ON: Retained Cleared
Restart
0 to ON: Retained Cleared
Restart
5A: Retained Cleared
A527.09
enabled
Other value:
A527.09 dis-
abled
ON: Disabled Retained Cleared
OFF: Not dis-
abled
Appendix D
Write Related
timing Flags,
Settings
--- ---
--- ---
--- A527.09
--- A527.00
to
A527.07