System Board; Replacing The System Board - Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual

System board and components
▶ Install the new microSD card on the Dual microSD 64GB Enterprise.
Proceed as described in the following:
▶ With the label facing up, insert the microSD card into the microSD slot on
the controller until it locks in place (see
▶ Install the Dual microSD 64GB Enterprise, see
64GB Enterprise" on page
Concluding steps
▶
"Installing a riser module" on page
▶
"Installing the CX2550 M6 or CX2560 M6 server node" on page
▶ If applicable, reconnect all external cables.
▶
"Switching on the server node" on page
▶
"Enabling the boot watchdog" on page
▶ If applicable,
"Resuming BitLocker functionality" on page
10.8

System board

10.8.1

Replacing the system board

Field Replaceable Unit
(FRU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Torx 30 screw driver
– Magnifying glass for inspecting CPU socket springs
(recommended)
256
247.
51.
73.
Upgrade and Maintenance Manual
Figure 171).
"Installing the Dual microSD
59.
81.
Hardware: 30 minutes
Software: 20 minutes
57.