Replacing The Power Distribution Board (Rx1330 M5) - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

Power supply unit (PSU)
Concluding steps
▶
"Connecting the power cord" on page
▶ Only when replacing a PSU in a non-redundant configuration:
the server" on page
▶
"Performing a fan test" on page
Performing a fan test is not needed if the hot-plug PSU is actively
replaced. iRMC runs automatically.
6.4.4 Replacing the power distribution board
(RX1330 M5)
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page 49
Removing the defective power distribution board
▶ Remove all PSUs, see
108
60.
94.
46.
"Removing a hot-plug PSU" on page
Upgrade and Maintenance Manual
57.
Hardware: 15 minutes
43.
69.
47.
"Switching on
45.
105.
RX1330 M5