Setting Up The Power Consumption Control - Daikin Altherma 3 WS EWSAH06UD 9W Series Installer's Reference Manual

6.6 Setting up the power consumption control

EWSAH/X06UD
Daikin Altherma 3 WS
4P675765-1 – 2022.04
#5: Single cable power supply
(= combined power supply)
+
Preferential kWh rate power supply
with separate normal kWh rate power
supply
NOT ALLOWED
Legend:
a Electrical cabinet:
a1 Normal kWh rate power supply (1N~ or 3N~ depending on
the backup heater)
a2 Preferential kWh rate power supply (1N~ or 3N~ depending
on the backup heater)
a3 Preferential kWh rate power supply (1N~)
b b1 Power meter 1 (1N~ or 3N~ depending on the backup
heater)
b2 Power meter 2 (1N~)
For details about connecting the power meters to the unit, see
"9.2.4 To connect the electricity
c Compressor (1N~)
d Hydro (1N~)
e Backup heater (1N~ or 3N~)
C1~C5 For details about C1~C5, see
4
supply" [
F1B~F3B Overcurrent fuse
S1S Preferential kWh rate power supply contact
You can use the following power consumption controls. For more information
about the corresponding settings, see
#6: Dual cable power supply (= split
power supply)
Preferential kWh rate power supply
with separate normal kWh rate power
supply
meters" [
"9.2.1 To connect the main power
91].
"Power consumption
6 Application guidelines
|
+
0 0 0 0
58 0 58 0
1 5 0 a3 1 5 0 a1
b2 b1
45 08 96
.0 05
X5M/3+4 X5M/5+6
S1S
F2B F1B F3B
C5 C1 C3
C4
c d e
4
99].
4
control" [ 200].
Installer reference guide
C2
51