Daikin Altherma 3 WS EWSAH06UD 9W Series Installer's Reference Manual page 128

10 | LAN adapter
To configure network settings
Via the configuration web interface
Installer reference guide
128
▪ Via the configuration web interface (various settings);
▪ Via the DIP switch (custom static IP address only).
Note on the LAN adapter IP address
Assign an IP address to the LAN adapter in one of the following ways:
IP address
DHCP protocol (default)
Static IP address
Custom static IP address
INFORMATION
Normally, network/IP settings are automatically applied and require no changes. Only
make changes to the network/IP settings when absolutely required (e.g. when the
system does not detect the LAN adapter automatically).
1 Go to "Network settings" on the configuration web interface.
2 Configure network settings.
Network settings
Information
DHCP active
Automatic
The system automatically assigns the
LAN adapter an IP address by way of the
DHCP protocol. This is the default
situation, and set on the configuration
web interface. See
configuration web
Bypass the DHCP protocol and manually
assign a static IP address to the LAN
adapter. Do this via the configuration
web interface. See
configuration web
Bypass any IP settings made on the
configuration web interface and assign
a custom static IP address to the LAN
adapter. Do this via the DIP switch. See
"Via the DIP
DHCP active Automatic Manually
Static IP address 10 . 0
Subnetmask 255 . 255
Default gateway 10 . 0
. 0
Primary DNS 10
Secondary DNS 10 . 0
Submit
Description + method
"Via the
interface" [
"Via the
interface" [
4
switch" [ 129].
. 0 . 7
. 255 . 0
. 0 . 1
. . 1
0
. 0 . 1
Translation/description
DHCP active
Automatic
Daikin Altherma 3 WS
4P675765-1 – 2022.04
4
128].
4
128].
EWSAH/X06UD