7.2.3 To remove the hydro module from the unit
EWSAH/X06UD
Daikin Altherma 3 WS
4P675765-1 – 2022.04
Removing the hydro module is only required for easier transportation of the unit or
for servicing. The removal of the module will significantly reduce the weight of the
unit. This makes the unit easier to handle and carry.
1 Open the following (see
1 User interface panel
2 Front panel
2 Remove the insulation from the shut-off valves by cutting the cable ties.
3 Remove the clips that lock the valves in place.
a
b
a
a Pipes for central water loop circuit
b Pipes for space heating/cooling circuit
4 Uncouple the piping.
4×
5 Remove the lower hydro module cover.
"7.2.2 To open the indoor
b
a
b
7
Unit installation
|
4
unit" [
62]):
1
2
Installer reference guide
65