Daikin Altherma 3 WS EWSAH06UD 9W Series Installer's Reference Manual page 108

9 | Electrical installation
Installer reference guide
108
NOTICE
Before disconnecting. If you want to remove or disconnect the brine low pressure
switch, first set [C‑0B]=0 (brine low pressure switch not installed). If not, this causes
an error.
1 Open the following (see
1 Top panel
2 User interface panel
3 Installer switch box cover
2 Connect the brine low pressure switch cable as shown in the illustration
below.
a Cut loop wires coming from A16P/X13A/1+4 (factory mounted)
b Splicing connectors (field supply)
c Wires from the brine low pressure switch cable (field supply)
3 Fix the cable with cable ties to the cable tie mountings.
"7.2.2 To open the indoor
S1PL
P<
2×
1×
1×
A16P/X13A/1+4
a
4
unit" [ 62]):
b c
Daikin Altherma 3 WS
4P675765-1 – 2022.04
1
3
2
EWSAH/X06UD