Daikin Altherma 3 WS EWSAH06UD 9W Series Installer's Reference Manual page 67

EWSAH/X06UD
Daikin Altherma 3 WS
4P675765-1 – 2022.04
9 Lift the uncoupled piping and use the handle on the front of the module to
carefully slide the module out of the unit. Make sure the module remains level
and does not tilt forward.
CAUTION
The hydro module is heavy. It requires at least two persons to carry it.
NOTICE
Make sure not to damage any insulation during the removal process.
Removal after first installation
If the water circuit and the central water loop circuit have been filled before, drain
all remaining water from the hydro module before you remove the module:
1 Remove the insulation from the shut-off valves. (See step 2 in
remove the hydro module from the
2 Close the shut-off valves by turning the lever handles.
4×
3 Remove the lower hydro module cover. (See step 5 in
hydro module from the
4 Drain remaining water from the hydro module.
4
unit" [ 65].)
4
unit" [ 65].)
7 Unit installation
|
"7.2.3 To
"7.2.3 To remove the
Installer reference guide
67