■
Reinstalling side plates and covers, frames R6...R9
IP21 (UL Type 1)
1.
Reinstall the side plates of the cable box (1a). Tighten the retaining screws
with a T20 Torx screwdriver (1b).
2. Slide the cover of the cable box on the module from below until the cover snaps
into place.
3. Reinstall the module cover. Tighten the two retaining screws with a screwdriver.
IP55 (UL Type 12)
1.
Reinstall the side plates of the cable box. Tighten the retaining screws with a
T20 Torx screwdriver.
IP21 (UL Type 1)
Electrical installation – North America 211
IP21 (UL Type 1)
2