Install optional modules, if any
See chapter Electrical installation in ACS580-01 (0.75 to 250 kW, 1.0 to 350 hp)
hardware manual (3AXD50000044794 [English]).
Install side plates and covers
See figure
G
on page 33.
IP21
1. Reinstall the side plates of the cable entry box (1a). Tighten the retaining screws
with a screwdriver (1b).
2. Slide the cover of the cable entry box on the module from below until the cover
snaps into place (2).
3. Reinstall the module cover (3a). Tighten the two retaining screws with a
screwdriver (3b).
IP55
1. Reinstall the module cover (1a). Tighten the two retaining screws with a
screwdriver (1b).
For start-up instructions, see chapter
EN – R6...R9 Quick installation guide 17
EN – Quick start-up guide
on page
23
R0-
R4
R6-
R9
R6-
R9
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH
ZH