Control Panel Leds - ABB ACS580 Series Hardware Manual

￭

Control panel LEDs

The assistant control panel has one LED. The table below describes the control
panel LED indications. For more information see
-W Assistant control panels user's manual (3AUA0000085685
Control panel LED, at the left edge of the control panel
LED off LED lit and steady
Panel Green Drive functioning normally.
has no
Connection between the drive
power
and control panel may be faulty
or lost, or the panel and drive
may be incompatible. Check
the control panel display.
Red Check the display to see where
the fault is.
• Active fault in the drive.
• Active fault in another drive
Reset the fault.
in the panel bus.
Switch to the drive in ques-
tion and check and reset
the fault.
ACS-AP-I, -S, -W and ACH-AP-H,
[English]).
LED blinking/flickering
Green Blinking:
Active warning in the drive
Flickering:
Data transferred between the
PC tool and drive through the
USB connection of the control
panel
Red Active fault in the drive.
To reset the fault, cycle the
drive power.
Blue Panels with a Bluetooth inter-
face only.
Blinking:
Bluetooth interface is enabled.
It is in discoverable mode and
ready for pairing.
Flickering:
Data is transfered through the
Bluetooth interface of the
control panel.
Maintenance 263