Dimension Drawing - ABB ACS580 Series Hardware Manual

364 Optional I/O extension modules
442 Optional I/O extension and adapter modules
Isolation areas:
1
2
Analog inputs (80...82, 83...85)
￭

Dimension drawing

• Wire size max. 1.5 mm
• Input voltage (AI+ and AI-): -10 V ... +10 V
The dimensions are in millimeters and [inches].
• Input resistance: > 200 kohm
• Optional cable shield connection
Analog outputs (86...88, 89...91)
• Wire size max. 1.5 mm
• Output voltage (AO and AGND): 0 V ... 10 V
• Output resistance: < 20 ohm
• Recommended load: > 10 kohm
• Inaccuracy: typical ± 1%, max. ± 1.5% of full scale
• Optional cable shield connection
Analog output scale switch
• ON state: 0.5 V ... 9.5 V range in use
• OFF state: 0 V ... 10 V range in use
AO3
2
AI4
Symbol Description
Plugged to drive control unit SLOT2
1 Plugged to drive SLOT2
2 SWITCH
Switch
Reinforced insulation (IEC 61800-5-1:2007)
Reinforced insulation (IEC 61800-5-1:2007)
Functional insulation (IEC 61800-5-1:2007)
Functional insulation (IEC 61800-5-1:2007)
2
2
CBAI-01
1
AO4
AI4