External Control Connection Terminals, Frames R1 - ABB ACS580 Series Hardware Manual

￭
External control connection terminals, frames R1...R5
The layout of the external control connection terminals of the R1 frame is shown
below. Layout of the external control connection terminals is identical in frames
R1...R5 but the location of the control unit with the terminals is different in frames
R3...R5.
R1...R5
X1
X2
X3
X4
X5
S4
S5
Operation principle and hardware description 49
X10
1
2
3
X13
X8
X7
X6
X14
Description
X1 Analog inputs and outputs
X2 Aux. voltage output
X3 Programmable digital inputs
X4 Safe torque off connection
X5 Embedded fieldbus
X6 Relay output 3
X7 Relay output 2
X8 Relay output 1
X10 Auxiliary fan connection (IP55)
X13 Option slot 1 (fieldbus adapter
modules)
X14 Option slot 2 (I/O extension mod-
ules)
S4,S5
Termination switch (S4), bias resist-
or switch (S5), see
485 fieldbus connection (page 223)
1 Panel port (control panel connection)
2 Cold configuration connection. This
connector is used with the CCA-01
configuration adapter.
3
Power OK and Fault LEDs. See sec-
tion LEDs (page
Embedded EIA-
262).