Installing The Drive Vertically, Frames R6 - ABB ACS580 Series Hardware Manual

￭
Installing the drive vertically, frames R6...R9
Select fasteners and their application to meet local requirements appropriate to
wall surface materials, drive weight and application.
1. Mark the hole locations for the six mounting holes using the mounting template
included in the package. Do not leave the mounting template under the drive.
The drive dimensions and hole locations are also shown in the drawings in
chapter Dimension drawings (page
Note: You can use only two bolts instead of four to attach the lower part of
the drive.
1
c
2. Drill the mounting holes.
3. Insert fixing anchors or plugs into the holes and start the bolts into the anchors
or plugs.
4. Position the drive onto the bolts on the wall. Lift the drive with a lifting device
as it is heavy.
5. Tighten the top two bolts in the wall securely.
363).
R6
mm
a 571
b 531
c 213
× 4
d 300
e 155
IP21,
kg
UL Type 1
42.4
IP55,
kg
UL Type 12
43
Mechanical installation 91
R7 R8
in mm in mm
22.5 623 24.5 701
20.9 583 23.0 658
8.4 245 9.7 263
11.8 300 11.8 300
6.1 155 6.1 155
lb kg lb kg
93.5 54 119.1 69
lb kg lb kg
94.8 56 123.5 77
R9
in mm in
27.6 718 28.3
25.9 658 25.9
10.3 345 13.6
11.8 300 11.8
6.19 200 7.9
lb kg lb
152.2 97 213.9
lb kg lb
169.8 103 227.1