Installing Ip66 (Ul Type 4X) Sun Shield; Connecting A Pc - ABB ACS580 Series Hardware Manual
General purpose drives
Hide thumbs
Also See for ACS580 Series:
- Firmware manual (462 pages) ,
- Quick start manual (116 pages) ,
- Supplement installation manual (36 pages)
Table of Contents
Advertisement
IP21 (UL Type 1)
3
Installing IP66 (UL Type 4X) sun shield
Refer to
ACH580-01, ACQ580-01, ACS580-01 4X IP66 drives, sun shield quick
installation guide (3AXD50001019006
Connecting a PC
WARNING!
Do not connect the PC directly to the control panel connector of the control
unit as this can cause damage.
A PC (with, for example, the Drive composer PC tool) can be connected as follows:
1.
To connect a control panel to the unit, either
•
insert the control panel into the panel holder or platform, or
•
use an Ethernet (eg, Cat 5e) networking cable.
2. Remove the USB connector cover on the front of the control panel.
3. Connect an USB cable (Type A to Type Mini-B) between the USB connector on
the control panel (3a) and a free USB port on the PC (3b).
4. The panel will display an indication whenever the connection is active.
5. See the documentation of the PC tool for setup instructions.
Electrical installation – Global (IEC) 171
IP55 (UL Type 12)
1
[English]), included in the sun shield package.
Advertisement
Table of Contents
