Control Panel Door Mounting Kits; Type Designation Label - ABB ACS580 Series Hardware Manual

52 Operation principle and hardware description
￭

Control panel door mounting kits

You can use a mounting platform to install the control panel on the cabinet door.
Mounting platforms for control panels are available as options from ABB. For more
information, see
Manual
DPMP-01 mounting platform for control panels installation guide
DPMP-02/03 mounting platform for control panels installation guide
DPMP-04 and DPMP-05 mounting platform for control panels installation
guide
DPMP-06 / 07 mounting platform for control panels installation guide

Type designation label

The type designation label includes IEC and UL (NEC) ratings, appropriate markings
and the type designation and serial number, which allow identification of each
drive. The type designation label is located on the left side of the drive, see section
Locations of the labels on the drive (page
1
2
3
4
6
7
No. Description
1
Type designation, see section
2 Contact address
3 Frame (size) (New design of frame R4 types are marked as R4 v2)
4 Type of the drive, for example, with Air cooling or Liquid cooling, and so on.
5 IEC: Icc (Rated conditional short-circuit current) = 65 kA,
UL (NEC): SCCR (Maximum prospective short circuit current rating) = 100 kA
6 Degree of protection
8
5
Type designation key (page
53). An example label is shown below.
9
54).
Code (English)
3AUA0000100140
3AUA0000136205
3AXD50000308484
3AXD50000289561
10
11