Oil Life Reset - If Equipped - Jeep GLADIATOR 2020 Owner's Manual

Up Arrow Button:

Push and release the up arrow
button to scroll upward through the
Main Menu items.
Down Arrow Button:

Push and release the down arrow
button to scroll downward through
the Main Menu items.
Right Arrow Button:

Push and release the right arrow
button to access the information
screens or submenu screens of a
Main Menu item.
Left Arrow Button:

Push and release the left arrow
button to access the information
screens or submenu screens of a
Main Menu item.
OK Button:

Push the OK button to access/select the
information screens or submenu screens of a
Main Menu item. Push and hold the OK
button for two seconds to reset displayed/
selected features that can be reset.
The Main Menu items consists of the following:
Speedometer

Vehicle Info

Off Road — If Equipped

Driver Assist — If Equipped

Fuel Economy

Trip Info

Stop/Start — If Equipped

Audio

Messages

Screen Setup

O L R — I E
IL IFE ESET F QUIPPED
Your vehicle may be equipped with an engine oil
change indicator system. The "Oil Change
Required" message will display in the
instrument cluster display for five seconds after
a single chime has sounded to indicate the next
scheduled oil change interval. The engine oil
change indicator system is duty cycle based,
GETTING TO KNOW YOUR INSTRUMENT PANEL
which means the engine oil change interval may
fluctuate, dependent upon your personal
driving style.
Unless reset, this message will continue to
display each time you place the ignition in the
ON/RUN position. To turn off the message
temporarily, push and release the OK button. To
reset the oil change indicator system (after
performing the scheduled maintenance), refer
to the following procedure.
Oil Life Reset
1. Without pushing the brake pedal, place the
ignition in the ON/RUN mode (do not start
the engine).
2. Navigate to "Oil Life" submenu in "Vehicle
Info" in the instrument cluster display.
3. Push and hold the OK button until the gauge
resets to 100%.
113
3